Another first yesterday - first drive to work. Zedster looks tiny in a car park next to those huge Ford Fiestas...
Long-term, I am considering commuting to work in Zedster instead of my motorbike, partly because I know I won't get enough free time at weekends for drives out (the wife just won't be happy) and partly because I'm not sure I can justify owning the bike and car, paying 2 lots of insurance and tax etc.
I love my bike but as I get older, I'm getting more conscious of the dangers and the hassle of getting changed at work every day is beginning to get irksome. The advantage of Zedster is that at least my wife will be a passenger (unlike my bike) which may get her to come out with me. Having said that, the drive home from work was crap - trouble on the M25 meant all the local roads were clogged and it took me 40 minutes to get home instead of the 20 minutes it would have been on the bike.
So with a few drives under my belt, a few concerns to be checked/fixed:
1. Wipers - I had a spit of rain yesterday but they wouldn't move correctly. Need to try and sort this at some point.
2. Suspension setup - my tyres squeal like a 70s American cop show at any speed in a corner. I don't know if this is just because they are so new or that all cars do that and you don't normally hear it but I could do with a pro going over my setup. Comfort-wise, Zedster is great, much more so than I expected, except when going through potholes - then you feel it and the car gets knocked off-line (although not sure much can be done about that).
3. Tighten up the windscreen screws - they do look crud from the drivers seat - big gaps between frame and bracket.
And then there is the list of upgrades (in order of importance):
1. Roof (on order). Need to lower seats (maybe just the drivers side?) for this as well.
2. A clock - amazing how annoying it is not knowing the time.
3. Doors - I have a cunning plan/design in mind. Not sure if it's feasible but I'll keep you posted.
4. Decals, graphics, badges - ok, I've ruled out flames but I want some decals on the car, maybe a stripe down the bonnet? But I am artistically-challenged so it could easily come out a mess - I need to get expert advice (wife, probably). I have a vague design for a rear badge but I need to get to grips with 3D software.
5. High level rear brake light.
6. Glove box - storage is a problem and there is a large open space on the dashboard which could have a small, traditional glove box built into it.
That should keep me going for a while...
Friday, 4 August 2017
Tuesday, 1 August 2017
Road trip!
Despite a bout of food poisoning that made me feel a bit yuck, the plates arrived this morning and nothing was going to stop that first legal road trip.
I stuck the plates on - I was planning on bolting the front plate on but I just didn't feel up to the effort of getting holes drilled correctly. I just about managed to adjust the suspension a little as the car seemed to have settled on the N/S.
With that done, it was time to hit the road:
Apologies but I couldn't work out a way to attach my camera to the car, so no video - I'll try another time.
A short, 80 mile trip around some beautiful English roads in a 2 seater convertible with the sun shining - it doesn't get any better.
Zedster (for that is his newly-annointed name) performed flawlessly - temperature stayed below 100 degC the whole time, nothing fell off or leaked and despite trying to remember that it's a new engine and needs running in, there were some enjoyable bursts of acceleration, hinting at the fun to come.
I stuck the plates on - I was planning on bolting the front plate on but I just didn't feel up to the effort of getting holes drilled correctly. I just about managed to adjust the suspension a little as the car seemed to have settled on the N/S.
With that done, it was time to hit the road:
Apologies but I couldn't work out a way to attach my camera to the car, so no video - I'll try another time.
A short, 80 mile trip around some beautiful English roads in a 2 seater convertible with the sun shining - it doesn't get any better.
Zedster (for that is his newly-annointed name) performed flawlessly - temperature stayed below 100 degC the whole time, nothing fell off or leaked and despite trying to remember that it's a new engine and needs running in, there were some enjoyable bursts of acceleration, hinting at the fun to come.
Sunday, 30 July 2017
Tracks of my Tears
Continuing the body theme, tear ducts added:
OK, windscreen washer bottle - it doesn't seem to be working at the moment but that may be that, like the horn, it doesn't work until the ignition is on all the way ie. engine running, so I'll try that next time out.
Added a storage net:
It looked a bit bigger on the website when I ordered it but actually fits quite neatly. I noticed on my trip to IVA that I needed something - my mobile phone was all over the place if you just leave it on the seat. This net is only stuck on with sticky pads which might well drop off - it came with screws if that happens.
So, with the V5 in the post, I've ordered some plates which should arrive on Tuesday - first drive video coming up!!
OK, windscreen washer bottle - it doesn't seem to be working at the moment but that may be that, like the horn, it doesn't work until the ignition is on all the way ie. engine running, so I'll try that next time out.
Added a storage net:
It looked a bit bigger on the website when I ordered it but actually fits quite neatly. I noticed on my trip to IVA that I needed something - my mobile phone was all over the place if you just leave it on the seat. This net is only stuck on with sticky pads which might well drop off - it came with screws if that happens.
So, with the V5 in the post, I've ordered some plates which should arrive on Tuesday - first drive video coming up!!
Friday, 28 July 2017
Eyelashes
So, I've had eyes, ears and now, eyelashes:
I did have to trim the arms a little in the end but they are adjustable so I just trimmed the adjustable end so they could adjust smaller (if that makes sense). I also had to twist them slightly to make the blades sit perpendicular to the screen. Despite all this and even with some water on the screen, I can't get both wipers to move (it worked with one).
I've also contacted Softbits to order a hood, which is going to take 4 weeks or so. For the hood to work, however, I'm going to have to lower my seat by removing that extra bar I added a few weeks ago to get through IVA because my head is just above the rollbar and will be up against the roof when on. Softbits tell me it vibrates at speed and will drive me nuts if it's vibrating against my head. Sounds bad so seats to be lowered....
I did have to trim the arms a little in the end but they are adjustable so I just trimmed the adjustable end so they could adjust smaller (if that makes sense). I also had to twist them slightly to make the blades sit perpendicular to the screen. Despite all this and even with some water on the screen, I can't get both wipers to move (it worked with one).
I've also contacted Softbits to order a hood, which is going to take 4 weeks or so. For the hood to work, however, I'm going to have to lower my seat by removing that extra bar I added a few weeks ago to get through IVA because my head is just above the rollbar and will be up against the roof when on. Softbits tell me it vibrates at speed and will drive me nuts if it's vibrating against my head. Sounds bad so seats to be lowered....
The Light - I see it....
...but I just can't touch it!!!
I must have annoyed some minor deity because the Cosmos is playing with me - I sent off my updated documents last Saturday, 1st class. When does it get to the DVLA? Wednesday!! First class?! A carrier pigeon would have been quicker...
But I called the DVLA today and good and bad news. The good news? It's done - I have a registration - woohooo...
Bad news? They've given me a Q plate! And they only posted the V5 today, so could be middle of next week before I get it and can get some plates made up!!!! (Yes, I can get them done online but not much quicker).
This is the MOST frustrating part of the whole build!!
(sorry for all the exclamation marks - I'm calmer now....)
I don't mind too much about the Q plate apart from the fact I did want to get a personalised plate at some point. However, I'm told I can send the V5 back (after I get the plates done, obviously), send another letter from GBS to confirm the parts were all new, wait another 4 weeks and then get a current age plate, hopefully.
It seems I was too honest on my V267 form and I wrote that the parts were 'refurbished' rather than writing 'new', which is what GBS do.
Not long now...patience, patience...
I must have annoyed some minor deity because the Cosmos is playing with me - I sent off my updated documents last Saturday, 1st class. When does it get to the DVLA? Wednesday!! First class?! A carrier pigeon would have been quicker...
But I called the DVLA today and good and bad news. The good news? It's done - I have a registration - woohooo...
Bad news? They've given me a Q plate! And they only posted the V5 today, so could be middle of next week before I get it and can get some plates made up!!!! (Yes, I can get them done online but not much quicker).
This is the MOST frustrating part of the whole build!!
(sorry for all the exclamation marks - I'm calmer now....)
I don't mind too much about the Q plate apart from the fact I did want to get a personalised plate at some point. However, I'm told I can send the V5 back (after I get the plates done, obviously), send another letter from GBS to confirm the parts were all new, wait another 4 weeks and then get a current age plate, hopefully.
It seems I was too honest on my V267 form and I wrote that the parts were 'refurbished' rather than writing 'new', which is what GBS do.
Not long now...patience, patience...
Sunday, 23 July 2017
Too sexy for the drive
A spurious post just to show the pretty much completed car:
Just need those darn plates! I got all excited when I saw an envelope from the DVLA but they had just sent me back all my documentation, rejecting the application! It was rejected because of water damage to some of the sheets (not my damn fault and it was still readable), photocopies of invoices aren't allowed (they weren't photocopies; GBS only have online invoices so I just printed them out) and I hadn't sent a Certificate of Newness, a document I'd never heard of and isn't obviously on the list of docs I needed to send. And the V55 doc has to be a proper form with a carbon copy, not printed off the Internet.
I phoned the DVLA in a right mood and had a real go at the poor sod who picked up - I've phoned them 3 times and EVERY time they said they had taken a look at the docs and said they looked ok. Could they not have seen the water damage and the supposed photocopies and the wrong V55 and told me 3 weeks ago?! And GBS didn't help - turns out the certificate of newness is just a headed letter from them to say I had bought the kit new from them - why had they not told me about that when I rang up to ask some questions about the forms?
Fortunately, GBS managed to email the 'certificate' promptly and the DVLA person gave me her direct address so I've posted everything back and she promised it should only take a couple of days from when she gets it. Damn well better be or I'll drive to Swansea and camp outside the building...!!
I started on the wipers and by sheer fluke (I had a 50/50 chance but normally I'm not lucky), I've got the motor parking on the left as I wanted, so no mod needed. Even better, the wiper blade fits the screen without needing any trimming, as most people seem to need to do. I think this is maybe because I've put the bottom cross bar underneath the frame rather than inside the frame, so my screen is an inch higher (the wiper is about 5mm off the top of the screen - perfect).
Having said that, after all the mucking about with my switch to get the park, it isn't working! Switch off and the wipers just stop dead! Annoying but not the end of the world. The wipers aren't on yet because I think I'll need to bend the arm slightly to make the blade perpendicular to the screen - at the moment, it's at an angle which isn't allowing the motor to move them properly.
Just need those darn plates! I got all excited when I saw an envelope from the DVLA but they had just sent me back all my documentation, rejecting the application! It was rejected because of water damage to some of the sheets (not my damn fault and it was still readable), photocopies of invoices aren't allowed (they weren't photocopies; GBS only have online invoices so I just printed them out) and I hadn't sent a Certificate of Newness, a document I'd never heard of and isn't obviously on the list of docs I needed to send. And the V55 doc has to be a proper form with a carbon copy, not printed off the Internet.
I phoned the DVLA in a right mood and had a real go at the poor sod who picked up - I've phoned them 3 times and EVERY time they said they had taken a look at the docs and said they looked ok. Could they not have seen the water damage and the supposed photocopies and the wrong V55 and told me 3 weeks ago?! And GBS didn't help - turns out the certificate of newness is just a headed letter from them to say I had bought the kit new from them - why had they not told me about that when I rang up to ask some questions about the forms?
Fortunately, GBS managed to email the 'certificate' promptly and the DVLA person gave me her direct address so I've posted everything back and she promised it should only take a couple of days from when she gets it. Damn well better be or I'll drive to Swansea and camp outside the building...!!
I started on the wipers and by sheer fluke (I had a 50/50 chance but normally I'm not lucky), I've got the motor parking on the left as I wanted, so no mod needed. Even better, the wiper blade fits the screen without needing any trimming, as most people seem to need to do. I think this is maybe because I've put the bottom cross bar underneath the frame rather than inside the frame, so my screen is an inch higher (the wiper is about 5mm off the top of the screen - perfect).
Having said that, after all the mucking about with my switch to get the park, it isn't working! Switch off and the wipers just stop dead! Annoying but not the end of the world. The wipers aren't on yet because I think I'll need to bend the arm slightly to make the blade perpendicular to the screen - at the moment, it's at an angle which isn't allowing the motor to move them properly.
Thursday, 20 July 2017
All clear ahead
Surprisingly, the windscreen wasn't too tricky to do, although I've not done a great job.
First off, I polished the scuttle as I'm about to cover half of it and it will be difficult to get to in future.
I'm not a big polisher and this took me 30 minutes - I won't be doing this often!
I removed the glass and re-drilled bigger holes in the side pieces - it's really difficult to get the self-tappers in, I found out with the 2 side screws, so I needed the holes bigger. Glass back in, gaffer tape to pull the arms in, son holding the frame in place and slowly screwed in 8 screws. A Stanley knife to trim the rubber and done:
Now, bad stuff - the screws are VERY difficult to get in so none are all the way in. The screen feels rock solid so I don't think it's a problem but close inspection will show up gaps between frame and supports. Worse is the fact that the windscreen guy seems to have cut the glass a tiny bit too small so it doesn't go in far enough on one side. Not horrendous - if it causes a problem I'll use some bond on it.
I went for a short drive up the road and all good - it didn't drop off, no vibrations, seemed very solid. Best of all, it makes the driving experience so much better when your head isn't getting blown off.
First off, I polished the scuttle as I'm about to cover half of it and it will be difficult to get to in future.
I'm not a big polisher and this took me 30 minutes - I won't be doing this often!
I removed the glass and re-drilled bigger holes in the side pieces - it's really difficult to get the self-tappers in, I found out with the 2 side screws, so I needed the holes bigger. Glass back in, gaffer tape to pull the arms in, son holding the frame in place and slowly screwed in 8 screws. A Stanley knife to trim the rubber and done:
Now, bad stuff - the screws are VERY difficult to get in so none are all the way in. The screen feels rock solid so I don't think it's a problem but close inspection will show up gaps between frame and supports. Worse is the fact that the windscreen guy seems to have cut the glass a tiny bit too small so it doesn't go in far enough on one side. Not horrendous - if it causes a problem I'll use some bond on it.
I went for a short drive up the road and all good - it didn't drop off, no vibrations, seemed very solid. Best of all, it makes the driving experience so much better when your head isn't getting blown off.
Subscribe to:
Posts (Atom)












