Electrics

Below is the wiring schematic for my dashboard.

Please note:

1. The plugs in the diagram are those attached to the GBS standard main wiring loom - pin-outs are available from GBS (I'll try get time to scan them in and put them up in here later).

2. I am NOT using any column stalks, which is why this schematic may look so complex. Instead, all the functions from the stalks are performed using rocker switches purchased from Carling. These are excellent quality but difficult to get hold of (see the link on the right).

3. I've now started the engine and can confirm all the dials work.

DISCLAIMER: I accept no responsibility for fire, damage, injury, death, world meltdown etc if you try duplicate this and it screws up in some way. Caveat Emptor.

Dash wiring diagram 

The wiper motor switch in the above schematic had to be changed (it was a rubbish one from CBS), replaced by a quality item from Carling. The wiring is a bit tricky though, so has it's own schematic:


UPDATE: September, 2021

I've now added a Start button and, partly for my own reference, below is the sketched-while-on-the-bog diagram:



No comments:

Post a Comment