Wednesday, 19 July 2017

Through the looking glass

Finally sorted the wiper switch wiring with the help of Les off the RHOCAR forum (schematic is on the electrics page ) but it took me ages to get the motor connected through the wiper gearboxes.

The problem was the metal pipe that the wiper wire runs through - I had to bend the first piece slightly but I kept getting a tiny kink in the pipe which stopped the wire going through. I had to trim and redo that pipe several times,  ending up with hardly anything left! It's in now but it's not the smoothest motion,  making a bit of a rasping noise. Hopefully it won't be too noticeable on the move.

UPDATE: Nope, horribly, horribly wrong - see here for how to do it properly.

Attached the mirrors to the windscreen brackets:


Next up is the windscreen - I didn't have a great idea of how hard this would be,  so I decided to try it out despite it getting a bit late. I used some washing up liquid on the rubber trim that comes with the kit from GBS and it was actually quite simple,  with help from my son to hold the frame upside down - the glass slipped into the frame easily:


The hard bit now is to get a self-tapping screw through the side  and into the cross member (this is how the factory do it, it seems). Doesn't seem the greatest method but I can't think of a better way. Next time...

I called the DVLA and I'm starting to get hacked off with them.  They've had my paperwork almost 4 weeks now and,  yes,  they officially quote 6 weeks but they keep promising me one week from now - and they've done it again! I'm just glad the car isn't ready anyway,  otherwise I'd be tearing my hair out.

Wednesday, 12 July 2017

Look back in style

When I were a lad,  I loved Cary Grant films and one scene in one of them,  To Catch A Thief,  always stayed in the back of my mind. Cary Grant and Grace Kelley in a very fake car scene:


And what I always was fascinated by is that little rear view mirror.  I do not really understand why but I just knew I always wanted one. So today,  a mini-dream came true (that black one for IVA never counted) :



It may not give much of a view back but I don't care - looks great.

I have wired up the new wiper switch but it blows the fuse so I've not done it right - question asked on forum to work out what I've done wrong.

Wiper gearboxes are loosely in place:


I put the motor roughly in place and marked on the flexible cable where it meets the gearboxes.  I then used that to cut the tube into 3 pieces - I need to slightly bend the first piece. Can't fit it yet until I've fixed the wiring...

Used a company called National Windscreens to measure and cut my windscreen glass:


Finally,  I've prepped the nose for the number plate:


I spoke to the DVLA again today - they hope to get my application complete by this time next week...

Sunday, 9 July 2017

Framed

Not much done all week; GBS sent me the wrong windscreen frame (I've got a GT chassis and they sent the narrow-body frame) so I've been waiting for that to arrive. It finally came on Friday and I first bolted the pillars to the scuttle.

Others seem to have trimmed and put the crossbar of the frame inside the main frame. I'm hoping to get a little more height to my screen by attaching the crossbar below the main frame,  if that makes sense. Less than an inch difference but every little helps...

This is it loosely in place:


Spent ages trying to work out how to use my existing wiper switch to work with the wiper motor but,  without a couple of relays,  it wasn't going to work.  I couldn't be sure which Carling circuit would work but eventually a quick call to Carling sorted it. Best of all,  they're sending me a switch for free,  which is very good of them.

I called the DVLA and,  in theory I should get my V5 by this Wednesday.... fingers crossed.

Sunday, 2 July 2017

Shark gills

So the bunting has been put away,  the dancing girls have left,  time to return to work.

I found someone local to cut louvres in my bonnet and it looks epic - I love the look of them:



I connected up the wiper motor and immediately blew the fuse - I've got the wiper switch on my dash wired wrong,  as I expected because I didn't put a huge amount of thought into it (wasn't needed for IVA).

The Carling switches are great but trying to understand the technical data sheet about them requires a degree in electronics - which I have but it's not helping me ☺.  Need some quality time with a multimeter.

Bought the windscreen frame and mounts from GBS and I've found a local company who will cut me the glass.

I decided to sort out the issues of getting my car in and out the garage (I've got a 2 inch lip that keeps catching the seat bolts) .  I've been using some simple wooden ramps I made but they're rubbish and have mostly fallen apart. So,  out with the concrete... I've never done a decent amount of concrete before (built a brick BBQ years ago) so I thought the 4 bags of ready-mixed concrete would be enough - oh no! Sixteen bags (!)  later....


I am in SO much pain - mixing all that concrete by hand almost killed me. I hope this works OK,  it's a bit thin in places... we'll see in a few days.

Friday, 23 June 2017

By the skin of my teeth

... But a PASS 



So,  last night I tightened up the handbrake and used a cable tie and pipe to hold the brake cable away from the rear wishbone.

This morning,  I went to a local garage to do a brake test - handbrake came up at 26% efficient (needs to be 18%) and brakes seemed OK but they don't do the test the same as IVA,  so I couldn't be sure. They also wouldn't let me just run on the rollers for a while to try bed the pads in - they were worried about damaging their stuff. So,  I had to hope it would work out...

Journey from Hell again to get to West London - if my car can survive doing 30 miles in an hour and 40 minutes,  it can survive anything! Poor thing has had a baptism of fire for its first 150 miles of its life.

I would highly recommend going for your test on a Friday - my tester was demob-happy and it really helped. He glanced at the brake line fixes and gaiter clearances - no problem. Up on the ramp,  he was very impressed with the way I had done the fix for the rear brake line and he was also very impressed with my build overall - he gave me a few horror stories of other kit cars he had had to test. He was strangely pleased to see I had put yellow paint marks on my bolts as well.... all this helped immensely with the next stage.

The brake test didn't seem to go much better than last time - I could see the figures he was writing down and they seemed similar to last time but he seemed happy. However,  the handbrake didn't come up to scratch - better but still too low,  he said,  despite my earlier MOT test at the garage. He then asked if I wanted to do any adjustment - I didn't really know what to do as I had adjusted it to the limit I could the night before but he obviously wanted me to pass,  so I simply tightened the handbrake as far as I could - so far,  in fact,  that I couldn't move the car by hand with the handbrake off. But he redid the test,  pronounced it a pass and then also very kindly allowed the 2mm of travel as enough of a reserve (I didn't even realise that was a requirement - it hadn't been mentioned in my first test). He went off to do the paperwork and I loosened the handbrake back to 'normal'.

So,  a pass but I feel a tad lucky - if I had caught the tester on a bad day,  it may have been another fail.

Took a slightly better route home and felt great - you can't be too shy in a kit car,  loads of people stare at you,  other drivers strike up conversations as you're sitting in traffic, no-one hoots at you when you do something illegal (I twice had to do a dodgy turn) and people wave you out all the time.

So, the main task is done - build a functioning,  road-legal car. The next steps are:

Bonnet louvres to help keep the engine cool.
Windscreen.
Roof (canvas).
Doors.

I could also do with calming the idle - it's at about 1050 rpm at the moment - could do with being 950.

In true awards ceremony style,  I'd like to thank some people for getting me to this stage:

1. Simon from GBS (well,  not any more) - I am the top poster on the GBS owners forum because I asked so many questions and Simon answered them all - his help was essential. No chance I would have finished without him.

2. Bob Tucker from the RHOCAR forum for welding my VIN plate on.

3. Colin from the same forum for loan of his brake pipe flaring tool and Jon for loan of the engine crane.

4. Several other builders blogs but mostly Richard Lincoln's - much clearer than my rambling.

It has been a great 2 years and I've thoroughly enjoyed the build,  in fact a little sad it's mostly over. But this should be a great summer!

Did I mention I passed? :-)

Thursday, 22 June 2017

Sweat shop

Hottest day of the year and I spent 3.5 hours in my garage last night - 32 degC, too much body fat and light exercise don't make a pretty sight.

But a good session; the issues with the steering rack gaiters touching the suspension was because, early in the build, I added a spacer under the O/S end of the rack to add some clearance from the wishbone. However, I didn't put a matching one on the other side, which is why one end is up in the air, the other down low, almost touching the wishbone mount. So, I made up another spacer and fitted it to the N/S end of the rack to level it up and it's much better now - decent clearance all round. That also might improve my self-centering....?

I adjusted the O/S brake line to the caliper to remove the pig-tail that the tester picked up on and that forced a brake bleed (which I wanted to do anyway).

The tester also failed me on a brake line into the master cylinder but at the end of the test, I think he was having second thoughts. He was concerned that a graze on the side of the pipe (caused by the brake flaring tool I used) might fail but he admitted it might take years before that happened, if at all. He suggested I just cover the line so the next tester can't see it and it would be fine :-) So, I bought some special tape which is designed to repair cracked pipes and covered the offending pipe in that - hopefully that will be ok.

My biggest worry is how to sort out the brake strength - I failed because, at slow speed, my front brakes are slightly weaker than the rears (fine at higher speeds). I've booked into a local garage tomorrow morning and I'm hoping to simply put the car on their rollers and just brake on and off, to try bed the brakes in and make them stronger that way.

Just have the wayward rear brake line to tie up out of the way of the wishbone and the handbrake to adjust to try make it stronger. There is an adjuster built into the system and I remember I did have a small amount of adjustment left to make the handbrake stronger - just have to hope that's enough.

Wednesday, 21 June 2017

No pressure, then

So, yesterday I phone up DVSA to book a re-test date. My options? This Friday or July 31st!!! 3 days or 40 days! Nothing in between!

I just can't wait until the end of July for what should be a 30 minute re-test, so I've gone for Friday - some long evenings coming up...I've got tonight, tomorrow and a bit of Friday morning as the test isn't until 2pm.

This could get messy...