Thursday 15 December 2016
Christmas lights
My temporary phone is a tad old, so excuse the photo quality but here is the VIN plate I did last night:
The electrical connectors arrived for the rear lights so a quick session to finish them off. I've put loom tape round the wires, then a rubber sheath and then the armour you can see in the picture below. Possibly overkill but I can imagine this is a very harsh environment for a cable. I also P-clipped it to one of the bolts:
Result looks pretty good (arches just resting on the tyres so will be higher) :
Subscribe to:
Post Comments (Atom)
Hi Neil,
ReplyDeleteTip on the VIN / ID plate - stamp either end of the texts with a dot or similar to show/prove its not possible to alter/add to etc.
Yes, I saw you did that but I'm confused - the IVA manual says you can't have punctuation marks and doesn't mention needing the end dots. I thought maybe the rules had changed sinced you passed?
ReplyDeleteYes, I saw you did that but I'm confused - the IVA manual says you can't have punctuation marks and doesn't mention needing the end dots. I thought maybe the rules had changed sinced you passed?
ReplyDeleteYou are correct - I can't find it in the IVA manual either,
ReplyDeleteI don't remember where it came from - might have been a conv. with my testing station when I had to self build the plate, but don't recall exactly now.
All the best.